|
1. PP PE Granulator Introuction PP PE granulator is mainly for all types of pipes, agricultural film, packaging film, film preservation of life, as well as low-density and high density HDPE and LDPE film such as PET recycled plastic rebirth granulating. Using a special screw design and different configurations, could also be applied in the production PP, PE, PET, PS, ABS, PA, PVC, PC, POM, EVA, PMMA and other plastic recycling and granulation blending.
PP PE granulator by extruder, Pelletizing machine, cooling tanks (or air-cooled equipment), with the set of complete and perfect machine, you can automatically continuous production, direct granulation, and granulation clean, pollution and aging phenomenon, greatly reduce production costs and increase productivity. Machine with a small size, high efficiency, good performance, low power consumption, high quality finished products, a distinctive feature of wide adaptability can adapt to meet a variety of processing requirements.
High-torque gear box design, implementation and operation of the noise-free stable properties.
Screw and barrel with a special hardening treatment, with wear, mixing performance, high-yield characteristics.
With a large output, high efficiency and stable quality, easy operation, etc., plastic granulator manufacturers to develop new products, the best choice.
2. PP PE Single Screw Hot-cut Granulator Technical Parameters
Model |
Extruder |
Motor power |
Screw Diameter |
Screw L/D |
Screw speed |
Cut-disk diameter |
Pelletizing Size |
Output |
MS-PPEL45 |
SJ45 |
5.5-11KW |
45mm |
25:1-33:1 |
20-100 |
200mm |
3×3 |
25-50kg/h |
MS-PPEL65 |
SJ65 |
15-37KW |
65mm |
25:1-33:1 |
20-100 |
200mm |
3×3 |
50-110kg/h |
MS-PPEL90 |
SJ90 |
37-75KW |
90mm |
25:1-33:1 |
20-95 |
200mm |
3×3 |
100-250kg/h |
MS-PPEL120 |
SJ120 |
55-110KW |
120mm |
25:1-33:1 |
20-80 |
200mm |
3×3 |
250-380kg/h |
MS-PPEL150 |
SJ150B |
110-160KW |
150mm |
25:1-33:1 |
20-80 |
200mm |
3×3 |
300-450kg/h |
MS-PPEL180 |
SJ180B |
185-250KW |
180mm |
25:1-33:1 |
20-70 |
200mm |
3×3 |
400-650kg/h |
3. PP PE Single Screw Cold-cut Granulator Technical Parameters
Model |
Extruder |
Motor power |
Screw diameter |
Screw L/D |
Screw speed |
Cooling water pump power |
Pelletizing Size |
Output |
MS-PPEL45 |
SJ45 |
5.5-11KW |
45mm |
25:1-33:1 |
20-100 |
2.2kw |
3×3 |
15-40kg/h |
MS-PPEL65 |
SJ65 |
15-37KW |
65mm |
25:1-33:1 |
20-100 |
2.2kw |
3×3 |
40-90kg/h |
MS-PPEL90 |
SJ90 |
37-75KW |
90mm |
25:1-33:1 |
20-95 |
2.2kw |
3×3 |
80-220kg/h |
MS-PPEL120 |
SJ120 |
55-110KW |
120mm |
25:1-33:1 |
20-80 |
2.2kw |
3×3 |
200-330kg/h |
MS-PPEL150 |
SJ150B |
110-160KW |
150mm |
25:1-33:1 |
20-80 |
4kw |
3×3 |
260-400kg/h |
MS-PPEL180 |
SJ180B |
185-250KW |
180mm |
25:1-33:1 |
20-70 |
4kw |
3×3 |
330-580kg/h |
4. PP PE Granulator Picture
|
|
|