|
1. PVC Granulator Introduction
PVC granulator by the conical twin-screw extruder and the corresponding composition of granulating auxiliary the PVC granulating equipment, mainly used with PVC, PE class or adding filler powder granulation. The production of plastic granules uniform, dense and beautiful, auxiliary die face pelletizing using the wind to send aggregates, vibration isolation cooling, with a high degree of automation, productivity good etc.
For the production of various PVC plastic pellets.
Plasticizing mixture evenly, compact structure.
The cooling effect is good, auxiliary use of wind to send aggregates, vibration isolation cooling, with a high degree of automation, production and high efficiency.
Pelletizing high accuracy, the production of plastic granules uniform, dense and beautiful.
Mainly used in hard or soft PVC hot-cut granulation.
2. PVC Granulator Technical Parameters
Model |
Extruder |
Motor power |
Screw diameter |
Cut-disk diameter |
Pelletizing Size |
Installed capacity |
Output |
MS-PVCL45 |
SJSZ45/90 |
18.5kw |
45/90 |
200mm |
3×2.5 |
65kw |
80KG/H |
MS-PVCL51 |
SJSZ51/105 |
22kw |
51/90 |
200mm |
3×3 |
70kw |
120KG/H |
MS-PVCL55 |
SJSZ55/110 |
30kw |
55/110 |
200mm |
3×2.5 |
78kw |
150KG/H |
MS-PVCL65 |
SJSZ65/132 |
37kw |
65/132 |
200mm |
3×2.5 |
85kw |
260KG/H |
MS-PVCL80 |
SJSZ80/156 |
55kw |
80/156 |
200mm |
3×2.5 |
105kw |
420KG/H |
MS-PVCL92 |
SJSZ92/188 |
110kw |
92/188 |
200mm |
3×2.5 |
105kw |
760KG/H |
3. PVC Granulator Picture
|
|
|