|
1. PP PE Film Granulator Introduction
Cleaning machine will first be pre-PE film uniformity through the conveyor into the crusher, broken into pieces of about Φ80 mm material, into the friction washer for a second cleaning. When the material by friction into heat after the washing machine cleaning cooking pot, so that the PE compound impurities in the plane and into separate fully from the sedimentation tank, in the sedimentation tank under the action of the internal wheel to continue to be rinsed PE materials. At the same time with the water overflow from the settling tank located in the end of the net conveyor into the centrifuge. After centrifuge dewatering of materials into the pipelines through the blower dryer, and then through the cyclone separator into the collection hopper, and then through the flat belt feeding system sent to the pairs of first-order-type extrusion granulating machine extrusion granulation.
High-torque gear box design, implementation and operation of the noise-free stable properties.
Screw and barrel with a special hardening treatment, with wear, mixing performance, high-yield characteristics.
Exhaust port design, will be water in the production process, waste gas discharged, resorted to pills more stable, more solid particles to ensure good quality of products.
With a large output, high efficiency and stable quality, easy operation, etc., plastic granulator manufacturers to develop new products, the best choice.
2. PP PE Film Granulator Technical Parameters
Model |
Extruder |
Motor power |
Screw Diameter |
Volume |
Installed Capacity |
Output |
MS-PEP300/90 |
90B |
55KW |
90mm |
300L |
120KW |
180KG/H |
MS-PEP450/120 |
120B |
90KW |
120mm |
450L |
180KW |
300KG/H |
MS-PEP800/150 |
150B |
132KW |
150mm |
800L |
260KW |
500KG/H |
3. PP PE Film Granulator Picture
|
|
|