PP-R Double Pipe Production Line

　1.PP-R Double Pipe Production Line Introduction
　First-class quality of the many years of experience into the double-pipe extrusion die. Because of the perfect double-pipe vacuum sizing system. Independent control of the overall structure of the twin-pipe traction agencies and synchronous cutting device.
　PE PPR double pipe extrusion production line distribution single Screw extruder, with different pipe die and auxiliary equipment and components, mainly used in the production of double-root PE pipe, PPR pipe, production pipe to the water pipes are mainly applicable to , hot water pipes, gas pipes, heating pipes and so on. Make full use of production line extruder extrusion capacity, the production of small diameter pipe can reach very high quality, production efficiency, the use of safe and convenient operation.
　Whole rational structure, reliable performance, achieve extruder main motor, traction motor synchronous speed. And the use of vacuum calibration method, the effect of sizing, and a high degree of automation, and setup a good man-machine interface.
　Production line of auxiliary vacuum calibration water tank for the twin-pipe calibration me by the two combination, separate operation, box made of stainless steel materials, before and after the move by the motor control. Traction inverter speed control using imported from Japan, the use of pneumatic clamping control. Cutting machine automatic fixed-length cutting, the use of PLC control procedures.
　2.PE PPR double pipe extrusion line technical parameters

Production line model	Extruder	Production diameter /mm	Production speed /m	Total installed power /kw	Production out/kg	Production line long
MS-PPRED63	SJ90	16-63mm	1-23m/min	120kw	150-280kg/h	30m
MS-PPRED110	SJ120	63-110mm	1-6m	180kw	200-450kg/h	40m
PE pipe introduction PPR pipe introduction

　3.PE PPR double pipe extrusion line picture